throttle

After the success of the previous group buy for this system Yates and Bloomfield are going to let us have another, same condition's and prices as last time. Normal website price (www.rs192.co.uk) is £334.95 inc VAT + £14.95 Delivery = £349.90 They are offering the groupbuy price at £299 inc...

Is this normal ?? When driving (more noticeable in 5th gear going down motorway) if i come off the throttle the T makes a quiet hissing type noise from I think is coming from engine bay. If I then go back onto the throttle noise disappears !! What is it ??

In two minds whether to do this or not but i just dont use the car at all and my house renovation has to take priority over racing at the moment. Only been out once this year at Oulton for a test/track day and last raced last year. It was previously owned and run by Alex Schooledge of Outpace...

ill start..... my white 3 door after some tw4t nicked a bus at 2am, this was the aftermath: the keen eye will also notice the 16v clio too, taken in part ex for the ERST i had before this. next up: wish i never sold it, and then this: and then: and then a pimp wagon lol: then...

Hi, I have owned a Cup packed 182 for over 4 years now, determined to keep it as long as possible. Always kind of wished for the Trophy set up so I have just invested in a full set of Trophy dampers. I was wondering what you guys could recommend to get the set up correct. Lots of advice already...

Morning everyone, have a couple of issues i'd like to ask everyone about before I start throwing money at her. First off and in fact the most annoying thing about the car at the moment is the speaker surrounds. All they do is bloody vibrate! I've tried turning the music up, down, wedging things...

I know Renault seem to get bad reviews amongst people regarding the reliability but during my ownership I have found the Trophy really reliable. I've owned it 3 years and 4 months and had the following issues... Failed Coolant Termperature Sensor Failed Damper Seal Failed CV Boot Clip Thats...

The standard air box seems to have two inlets for air. One with a cold air feed pipe that disappears somewhere underneath the nearside headlamp and another inlet without any cold air feed. Is this right ? Still having trouble with my T :(

Many of you may have noticed I have been posting alot of "lack of power" and problems with my trophy topics. Recently I have been having trouble with performance from my T. Last night I noticed a fairly loud noise coming from the engine bay when the ignition was on. I poped the bonnet and...

Just noticed fastchip offer a Decat overrun calibration for 29euros. Just wondering if anyone has any info on it, will it have any performance increases over the standard 98ron cal upgrade they offer for 10euros? Or is it just a bit pointless?

Hi, What does the warning light on my trophy mean... It is the one that looks like a heart monitor... it always as far as i can see is combined with the diesel heater light but I obviously don't have one of those... saying that there is water in the fuel.... is it ok to drive or should get it...

David the Ed' has been busy and the next issue is Rammed to the brim with content. We have a new technical editor on board so welcome to Rob Hawkins (many of you will know him). As a special the magazine has for the sixth consecutive issue jumped in size and now over 35% thicker than it was...

Firstly, thanks to James & Tom at JMS, despite having to be on the Eurotunnel at 6am this morning, James was bleeding my brakes at midnight last night - mostly thanks to another of our friends bringing in a last minute brake related emergency/c0ck up i might add ... IR tired. So, the work done...

My Trophy's exhaust back boxes are finally on their last legs and so the selection of an aftermarket cat back system begins... So the initial search led me to the KTR Ultra performance system, which has a 2.5 inch bore from cat back. A bit more research led me to the understanding that the...

Well even after nearly 6 years of ownership this little pocket rocket still surprises me. I know how quick it is on a B road, but in a straight line i always thought it slightly underpowered to take on the great and good of Germany's finest but boy was I wrong. 100 octane racing fuel on board...

Went to start car this morning, wouldnt start first time, start sedond after I pressed in accelerrator, but,,, the service light, abs light a d traction control light have stayed on, could this just be a sensor? Any thoughts

OK, so last night i got the Geo done by a mates garage. Yes, they are a bodyshop, but when you are the authorised repairer for Lotus, Aston, Ferrari, Lamborghini & Pagani, you probably know how to set up a clio lol ... So, effectively, since we fitted the front suspension, the Toe has been out...

Now for sale as my friend can’t get insured on the 182 with it all fitted lol … We’re looking to sell the whole lot in one go, so everything that has been changed/adapted we'll give the purchaser - essentially creating a plug & play installation. From memory, this should include the following...

My trophy has gone in for its major service. It went to a garage rather than Renault them selves due to it costing nearly 500 pounds more at Renault. My trophy was having everything changed that was on the Renault major service check list and genuine Renault parts however i had a small leak of...

Pick my car up from jamsport saturday after having ported and matched inlet, custom remap, whiteline rear arb, pagid front discs, ferodo ds2500 front pads, goodridge braided brake hoses all round and 5.1 brake fluid so will let you all know the results fingers crossed they will be good :lol:

Ok, so i dont normally whore, but thanks to James (JMS) and Mike (FailSport) last night, the TroFail is now finished. I'm sure a few of you will have read my project thread, & i'll update that with more info than in here, but chuffed isnt the word, it drives brilliantly & looks ruddy lovely imho...

Hi i have always said on all my cars i have owned if engine required major repair i.e. piston bent valve etc.. I would put uprated internals in and bolt a turbo on (if only it was that easy:-)) Just woundered wat peoples views are on turbo trophy? (Just to add there is nothing wrong with the...

Hey Guys! I've fancied a new project for a while and finally found what I was looking for today!... I decided to treat myself to a 106 S1 Rallye to use mainly for track days and road rallies! Great spec, just a few little jobs and she's ready for some track action! I've got a couple of sets of...

Recently my car has not been starting properly on the first turn of the key if its turned to quickly. i read up on this and it seems alot of 182s suffer with it but today it took me maybe 15 attempts to start the car. The car was turning over strongly but just not catching before but this time...

Was under the bonnet of the trophy tonight and i came across this unknown wire. Its been taped up and it been hanging down for some time as it was all dirty. All my lights / fogs / horn and everthing else work so i have no idea what its for. . . .Can someone check there 182 to maybe have a...

The JMS RS2 Intake Manifold The RS2 Manifold as it has been named, is a ground breaking product for the ph2 range of RenaultSport Clios. Traditional NA tuning methods surrounding the 2.0 Litre Renault engine involve extensive & costly changes to either the engines internals, or via ITB...

i some times get a quite ticking sound when my trophy is idling. usually when its been running for a while. it is due its major service but my other trophy does it aswell ? so dont no weather or not this is normal ?? any one elses does it ??

anyone thinking about getting this set up? or seen it in the flesh? looks the amazing.

Trophy #461 No clean shots in here detailing freaks. It gets driven, & it gets driven hard. 172k miles & counting. Mud is courtesy of the field at Haynes, which was perfect for handbrake turns ;) Trophy # 433 (now owned by Luke_89) On its holidays in August...

http://www.angel-works.co.uk/product_2ltrinlet.php Not particularly just the Angel-works ones(although they do seem better value than say K-Tec) but the matched inlet manifold in general? anyone on here have one fitted?