These were in the car when i bought it. I have since and replaced with original ones. Looks good however I wanted the car to be unmodified.
£20.00 including postage.
This is what they look like;
Hi i have always said on all my cars i have owned if engine required major repair i.e. piston bent valve etc..
I would put uprated internals in and bolt a turbo on (if only it was that easy:-))
Just woundered wat peoples views are on turbo trophy?
(Just to add there is nothing wrong with the...
Right guys I'm considering swapping my wheels. My Trophy is a second car and if I'm honest it all ways will be.
The plan is to downsize to 15"Alloys, I only ever use the car in the dry so figured I could get away with a set of road legal track tyres, which would also cover the handful of...
Hi people im after technical knowledge here, im in need of a axial joint aka tie rod and tie rod end for the Trophy.
Its for my n/s due to seizure and im contemplating in heating to free it off then grease it up after cleaning but i know this is not done practice.
I called Renault today and...
Another quality Trophy listing on ebay.
http://cgi.ebay.co.uk/2005-Renault-Clio-Renaultsport-182-Trophy-Hatchback-/330516876685?pt=Automobiles_UK&hash=item4cf4574d8d
Odd thing is the rest of the pictures are indeed a T.
What is a trophy worth in bits? The car in question is completely standard with engine failure
Dampers are fine, one wheel has a kerb mark that I can see and the mileage is 65-70k miles.
I'm informed the gearbox is fine and the recaro's are in mint condition, any help is appreciated
Hey Guys! I've fancied a new project for a while and finally found what I was looking for today!... I decided to treat myself to a 106 S1 Rallye to use mainly for track days and road rallies! Great spec, just a few little jobs and she's ready for some track action!
I've got a couple of sets of...
Not sure if its a common problem on the Trophy as had numerous 182's before and have never had this problem.
However having just recenty bought a Trophy I have found strange happenings when manouvering on or near full lock??
No horrible noises, just the steering wheel has a mind of its own and...
Want to replace my sprayed red dashboard (NS and OS) inserts including gear knob and "renault sport" steering wheel insert with original trophy ones.
Question;
Did the trophy's come standard with the carbon fibre looking ones or are they the same as the older 172 that are plain silver?
Cash...
Was under the bonnet of the trophy tonight and i came across this unknown wire.
Its been taped up and it been hanging down for some time as it was all dirty.
All my lights / fogs / horn and everthing else work so i have no idea what its for. . . .Can someone check there 182 to maybe have a...
Show us your Trophy and who's behind the wheel :)
Lets put a face to the name on here :)
Had 201/500 since Aug 2009
Here's The trophy all clean ( Not like this currently :( )
And the one and only me :)
Work time ... dont ask lol....
Out and about
I'm thinking of buying a couple of Mich PE3's as the fronts need replacing.
Rears have covered at least 15,000 miles but have good tread.
Do you,
A) Replace the fronts with the new tyres?
Or
B) Switch the partially worn tyres on the rear to the front, and put the new tyres on the rear.
?
Hi,
I am looking for a 172 steering wheel with an intact left thumbgrip (yes, I do mean left :) ). Other damage may also be allowed and I don't want the airbag.
Anybody?
Cheers,
Erik
Hi folks
There is a hairline crack in one of my front fog lights. I actually had to use them last week(!) and spotted it.
Are these easy to change? Also, does anyone know what they cost and whether they just come as a sealed unit or can you just get the outer lens (probably not I assume)?
Thanks.
Hi do you know any dealers or of any speedline dealers that sell the genuine trophy wheels at a good price .
My dealers want £185 a wheel :\
I fancy treating 201 to a new set of shoes as shes on her original ones and there not to bad of condition , otherwise i might go for a refurb but im...
Does anyone have a list of cd players that will work with the steering wheel hand controls. Would be good if they also are iPod touch friendly. Any help would be great cheers
I am soon to fit some eibach sportlines to the Trophy. I know that this will affect the geometry somewhat so i was going to book it in to have a wheel alignment, but do i need camber correcting bolts as it is being lowered?
Cheers
I have 3x Trophy Turini's here 1 with a Pe2 with a few mm of tread and 2 with budget tyre's with plenty or tread all come with centre cap's and have a few mark's on could defo do witha refurb £75 each if i can get 3 buyer's or £200 for all 3.
I also have a full Trophy Sachs set up all in...
Trophy #461
No clean shots in here detailing freaks.
It gets driven, & it gets driven hard. 172k miles & counting.
Mud is courtesy of the field at Haynes, which was perfect for handbrake turns ;)
Trophy # 433 (now owned by Luke_89)
On its holidays in August...
Im going to be putting my dampers back on this weekend after having them refurbished (and some new eibach springs put in :wink:) , as the suspension has been taken off, does this mean the car will need a four wheel alignment? If so, does anyone know of good places to get this done in the Essex...
Right since my collection is growing I need to get rid of some stuff!!
Brand new Silverline 125mm DA sander, comes with backing plate but no pads
Various Wheel brush's (2 of them are Megs)
Glare UK polish
AG Shampoo+Conditioner 1/4 full
AG SRP (around 3/4 full)
AG EGP (around 3/4 full)
AG Auto...
I recently bought some port matched inlets butbefore fitting I spent hours polishing up the out side before fitting. I complemented this with a polished strut brace that really doesn't offer much in way of performance increase but unlike the way it looks.
Also did my own tacho change by buying...
I've finally relented and decided to fit the intemittent wiper stalk. I have a very good guide on how to fit it.
However, it does not state exactly how to remove the upper steering wheel cowling/cover. There don't seem to be any screws holding it in.
Does anyone know how to remove this?
Thanks.