Joined
Sep 25, 2011
Messages
28
Reaction score
0
Location
Bristol
Im pretty new to all this clio stuff so please bear with me as im a bit thick when it comes to cars.

I went to a ford rolling road day to help a good mate make up the numbers and my trophy ran 196BHP. Its a 55 plate and as i understood it completely standard. The place i went too were full of compliments for the car and the engine in particular asking what i had done to it but i haven't touched it, i have only had it serviced.

The only thing i can find is a receipt for a replacement cam belt and it comes too about £900 which think is quite a lot for a belt, correct me if i am wrong.

What sort of upgrades could it have? somebody suggested a re-map but how would i tell?

Thanks

Gareth
 
Joined
Jan 18, 2011
Messages
38
Reaction score
0
Price is probably just for the belt change, at a dealers it could easily total that.

Did any other clios run?

Chances are the RR over reads, for a true value you need to be running alongside other clios or go to RST/TDF who have a give more realistic RR figure.
 
Joined
Jul 27, 2006
Messages
6,211
Reaction score
813
Location
OXFORD
Trophy No.
307
Saw this over on CS. In the same way that there are some very poor engines there are also some very strong and you could have one of those but even so that seems very very high even with engine mods. I would be looking at a run on different rollers.
 
Joined
Sep 25, 2011
Messages
28
Reaction score
0
Location
Bristol
its 391 but i didnt see anything on the register. no all the other cars were fords and they all ran what they were expected to or worse, nobody else over ran. I am going to get a second run on a different RR to see what that gives. the bloke who owned the place thought it would be cams and a remap.

I dont know about you lot but all the power comes really late on mine, i get nothing until 3500rpm then i get a bit and then at 4500rpm it just kicks me in the face. do you get a different respone? i will post pictures of the results up on here when i go back to my parents as i left the log book there.
 
Joined
Oct 17, 2005
Messages
668
Reaction score
0
Location
Stratford on Avon
As standard they usually have a kick at 5200rpm. Sounds like it has been modified but it still sounds like a lot for a 182. I have seen some talk of cams making good power on cliosport but people on here have not had those kind of results.
 
Joined
Sep 25, 2011
Messages
28
Reaction score
0
Location
Bristol
You can usually tell if you have cams if you have a lumpy idle.

a what sorry? im pretty thick at this car stuff. One thing i have notices is when the engines cold it revs itself to about 1750 and then back down again constantly until the engine is warm. Anybody elses do this?
 
Joined
Jul 27, 2006
Messages
6,211
Reaction score
813
Location
OXFORD
Trophy No.
307
You can usually tell if you have cams if you have a lumpy idle.

It's a RS 182, of course it's got lumpy idle. ;)


Also if anyone can point me in the direction of a roadworthy 182 with cams making a reliable 196 I will eat my shoes.
BTW, what were the torque figures?
 
Last edited:
Joined
Feb 3, 2010
Messages
625
Reaction score
4
Location
Chester
Trophy No.
214
Rollers are definitely over-reading. I would probably be saying the same if it made 182bhp.
 
Joined
Feb 3, 2010
Messages
625
Reaction score
4
Location
Chester
Trophy No.
214
The £900 cambelt was probably done at a main dealer. If the previous owner took it to a dealer, they probably didn't know enough about the F4R to get 196bhp either!
 
Joined
Sep 25, 2011
Messages
28
Reaction score
0
Location
Bristol
It's a RS 182, of course it's got lumpy idle. ;)


Also if anyone can point me in the direction of a roadworthy 182 with cams making a reliable 196 I will eat my shoes.
BTW, what were the torque figures?

!56lbps, it seems like it the rr was over running but if mine was the only one out of 18 cars that put out more than expected? really?
 
Joined
Feb 3, 2010
Messages
625
Reaction score
4
Location
Chester
Trophy No.
214
Were there any other clios? Maybe the Ford owners were happy to believe the numbers.
 
Joined
Jul 27, 2006
Messages
6,211
Reaction score
813
Location
OXFORD
Trophy No.
307
156lbs of torque is also pretty high, Like I said earlier it sounds like you've got a good one on some generous rollers.
 
Joined
Jun 18, 2006
Messages
223
Reaction score
2
Location
Leicestershire
Mine also made 156lbs but with 184hp and that was with a custom map, cams, exhaust, maxogen and a reworked inlet. Although it was with a brand new gearbox and low miles on the engine so would've probably given a bit more hp with a few more miles.

Maybe Gaz 535's is just worn in properly with good mileage on it. Have Trophys been hp tested with higher mileage? Maybe they give more.
 
Joined
Feb 21, 2008
Messages
703
Reaction score
4
Location
Failsport HQ.
Maybe Gaz 535's is just worn in properly with good mileage on it. Have Trophys been hp tested with higher mileage? Maybe they give more.

Mines got 182k on it and pulled 175bhp at Surrey Rolling Road - thats with a V6 airbox/Pipercorss filter, BTB catback exhaust, aircon delete & JMS '98 ron map. Most importantly, the cam timing was spot on & it had just had a massive service!!

For the OP to have got 196 it will HAVE to have Cams, exhaust, de-cat, & a good remap. Or simply be done on the Ktec dyno :p

What were the 'at the wheels' figures OP?
 

Cue

Joined
May 18, 2006
Messages
6,607
Reaction score
163
Location
Republico Yorkshire
Trophy No.
274
It's all subjective - if the Rolling roader was set up for ford tollerances then it's bound to be off for Clio's as the losses throught the drive train are different. Did you get the acutal output figures for the true, at the wheel, readings or just the calculated fly wheel readings?

All 182 engines are really lumpy when cold, due to the engines' lack of choke function, they tend to bounce at around 1300 revs for the first 5 mins or so. During this time its actually possible to not touch the accelerator, stick the car in 5th and still do 30 mph.

I've learnt a fair bit about RR's in the last few years, Having done a fair few and got very widely ranging results (162 to 198bhp with nothing other than temp changes!) I've concluded they're only as accurate as the computers data on each exact cars drive train losses (so not very) The only way of accurately gauging bhp is to remove the engine, stick it on a test bed and revs the nuts of it when connected to a dyno - this will tell you the engines output.

Take the figure with a pinch of salt and be happy that you probably made a lot of Ford owners jealous. :)

You may find if yours is sitting at 1700 the throttle body needs cleaning - 5 mins of a job to take off, clean and replace.
 
Last edited:
Joined
Sep 25, 2011
Messages
28
Reaction score
0
Location
Bristol
It's all subjective - if the Rolling roader was set up for ford tollerances then it's bound to be off for Clio's as the losses throught the drive train are different. Did you get the acutal output figures for the true, at the wheel, readings or just the calculated fly wheel readings?

All 182 engines are really lumpy when cold, due to the engines' lack of choke function, they tend to bounce at around 1300 revs for the first 5 mins or so. During this time its actually possible to not touch the accelerator, stick the car in 5th and still do 30 mph.

I've learnt a fair bit about RR's in the last few years, Having done a fair few and got very widely ranging results (162 to 198bhp with nothing other than temp changes!) I've concluded they're only as accurate as the computers data on each exact cars drive train losses (so not very) The only way of accurately gauging bhp is to remove the engine, stick it on a test bed and revs the nuts of it when connected to a dyno - this will tell you the engines output.

Take the figure with a pinch of salt and be happy that you probably made a lot of Ford owners jealous. :)

i got the figures for at the wheels aswell, i havnt got the to hand but it was 130 something, possibly 136. it is annoying that all rolling roads you go too give different results. I dont know if it was caliberated for fords only or not as there were 2 audis, 1 honda, my clio and 3 vauxhalls there too.

im not overly bothered about the BHP figure i just want to get an idea of what sort of upgrades have been made to the car so that i dont spend money on something i dont need too. your right it did wipe the smile off the Fiesta ST owners faces :)
 
Last edited by a moderator:
Joined
Feb 21, 2008
Messages
703
Reaction score
4
Location
Failsport HQ.
i got the figures for at the wheels aswell, i havnt got the to hand but it was 130 something, possibly 136.

The clio 1*2 loses about 17% through the transmission.

So i'd say the car is probably more likely to be putting out about 165-170bhp ATF, which unfortunately is about right for a standard one - tThey usually chuck out less power if they're had a cambelt change done & the timing is incorrect.

FYI, these graphs are from Surrey Rolling Road - arguably the most consistent place around as they just do rolling roading, no tuning rights to brag about. These results were also from a ClioSport day, so the rollers were calibrated for Clio's, nothing else.

ATF
doc003-1.jpg

ATW
doc004-1.jpg


In addition, the car should not at any point idle at 1700rpm. If it does there is something wrong. Even on cold start it shouldnt really go above 1350 or so.
 
Last edited:
Joined
Sep 25, 2011
Messages
28
Reaction score
0
Location
Bristol
right, i have found the power curve and it is uploading now. I have contacted the previous owner who has said he had it chipped but hasnt as yet said any more than that. Picture to follow
 
Top