Joined
Feb 3, 2010
Messages
625
Reaction score
4
Location
Chester
Trophy No.
214
Spring is here, time to get rid of the swirls from the harsh winter.
I’ve used a DAS-6 a few times and achieved reasonable results but now I’ve decided to upgrade to rotary in the form of a cheap and cheerful Silverline.

Due to time restrictions and it being my first time I’m only aiming for about 80% correction (I use it every day anyway).

Apologies for the amateur camera work. Its an ancient point and shoot which keeps flicking itself to video so I just take the shot whenever it decides to work!


A few before shots:
DSC00062.jpg
DSC00063.jpg
DSC00064.jpg
DSC00065.jpg
DSC00066.jpg
DSC00067.jpg
DSC00068.jpg
DSC00070.jpg
DSC00071.jpg
DSC00072.jpg
DSC00073.jpg
DSC00074.jpg

I found some AG wheel cleaner in the cupboard. Probably stronger than my usual bilberry solution..
DSC00075.jpg
DSC00077.jpg

Iron-X’d.. so THAT’S what that brown stain was!
DSC00078.jpg
DSC00079.jpg
DSC00080.jpg

Arches given a quick scrub
DSC00081.jpg
DSC00082.jpg
DSC00083.jpg~

Wheels given a layer of Jetseal.

Car jet washed and foamed with PH neutral foam, shuts, trim and details agitated with a soft brush
DSC00084.jpg
DSC00085.jpg
DSC00086.jpg
DSC00087.jpg
DSC00088.jpg
DSC00089.jpg
DSC00090.jpg
DSC00092.jpg

Dodo SN still holding up after winter
DSC00093.jpg

Washed using TBM (grit guard in the rinse bucket), with Dodo BTBM and a sheepskin mitt.
DSC00094.jpg

Tar removed and Iron-x’d
DSC00095.jpg
DSC00096.jpg
DSC00097.jpg
DSC00098.jpg

Time for clay (and a beer)
Sonus green clay, Dodo born slippy lube and a mug of hot water
DSC00099.jpg

Pretty clean..
DSC00100.jpg
DSC00101.jpg
DSC00102.jpg

found some!
DSC00103.jpg

Ooops! In the bin it went
DSC00104.jpg

Washed again with BTBM and sheeted off with an open hose.
DSC00105.jpg
DSC00106.jpg
DSC00107.jpg

Clean. Time for inspection
DSC00108.jpg
DSC00109.jpg

Day 2
I was of course greeted with this..
DSC00110.jpg

Various before/after shots
DSC00113.jpg
DSC00116.jpg
DSC00117.jpg
DSC00118.jpg

Menzerna PO 85 RE 5 on an orange polishing pad, followed by ( I can’t remember the name, menzerna something) on a finishing pad.
DSC00119.jpg
DSC00120.jpg
DSC00121.jpg
DSC00122.jpg
DSC00123.jpg

I knew I wasn’t going to get the whole car polished in a day, so I decided to lay down some protection as I finished each area.
Following polish each panel was wiped down with IPA/distilled water 50:50 solution and treated with Werkstat Prime Strong by DA on a soft pad.
DSC00125.jpg
DSC00126.jpg
DSC00127.jpg
DSC00128.jpg
DSC00129.jpg
DSC00131.jpg
DSC00132.jpg
DSC00133.jpg
DSC00135.jpg

Jetseal 109
DSC00136.jpg
DSC00137.jpg
DSC00138.jpg

Day 3:
The car was soaking from the misty weather. Doused with water and dried off.

The first coat of Jetseal from yesterday is doing the trick:
DSC00139.jpg
DSC00140.jpg
DSC00141.jpg
DSC00142.jpg
DSC00143.jpg

Various before/after shots
DSC00144.jpg
DSC00145.jpg
DSC00146.jpg
DSC00147.jpg
DSC00148.jpg
DSC00149.jpg
DSC00150.jpg
DSC00151.jpg
DSC00152.jpg
DSC00153.jpg
DSC00154.jpg
DSC00155.jpg
DSC00156.jpg
DSC00157.jpg
DSC00158.jpg
DSC00159.jpg

After 2-3 coats of Jetseal I applied 2x Coats of Dodo Supernatural (an hour or so apart)
DSC00160.jpg
DSC00161.jpg
DSC00164.jpg

I had hoped to get some arty shots but the location I was going to use has since been gated off. So out of ideas and out of light I headed home.
DSC00166.jpg
DSC00167.jpg
DSC00168.jpg

Very happy with the results.
Thanks for reading, comment welcome :)
 
Joined
May 30, 2007
Messages
1,279
Reaction score
145
Location
Cambs
Mighty fine effort! Would look even better without the silly stickers.
 
Joined
Jan 3, 2007
Messages
401
Reaction score
0
Location
Cumbria
Looks great!! Must buy a rotary! Must give mine the 2 day detail soon as weathers gettng better.
 
Joined
Jun 30, 2007
Messages
132
Reaction score
0
I wish I had enough time on my hands to do this, looks beautiful. Stickers are ghey though.
 
Joined
Feb 3, 2010
Messages
625
Reaction score
4
Location
Chester
Trophy No.
214
Thanks for the comments :)

The sticker is just a joke whilst Sheen is in fashion :p
 

keo

Joined
Jan 6, 2009
Messages
115
Reaction score
0
looks good mate, wish i had the time to do mine
 
Joined
Jan 7, 2009
Messages
743
Reaction score
2
Location
Essex
Wish i knew how to do this lol! My limits are pretty much AG SRP and the extra gloss protection stuff lol. I cant find any real beginner guides for detailing anywhere as i would like to give it a try!

Good work though 8)
 
Joined
Nov 23, 2009
Messages
217
Reaction score
1
Location
Manchester
Aucky - how did the rotart feel in comparison to a DA?? Is it as dreaded as some say?? Did you get better results far far quicker?

Elliott.
 
Joined
Feb 3, 2010
Messages
625
Reaction score
4
Location
Chester
Trophy No.
214
^
It definitely isn't the fire breathing monster that some people make out, but it is totally different to a DA.
Correction does come quicker, but its more physical than using a DA. You really need to keep the pad moving to avoid heat build up and if you hold the pad at a slight angle it has a tendancy to jump.

Another thing is that the rotary will tend to move where it wants to, and I just had to suggest it go in the right direction, it doesn't have the controlled accruacy the DA has, which is why I used the DA as an application tool instead of the rotary.
 
Top