My exhaust has been blowing abit since i had it replaced and when i lift off in 2nd gear i can hear a thud, i had i look at my top engine mount and i can move the engine/mount back and forth abit. Is this normal?
Hi guys,
I thought I'll put a little update on what I brought after selling trophy 383 to 'jh106'.
I searched high and low for a decent one and eventually one turned up and there were only 4 of these in the country at the moment... so I couldnt miss out!
Its a 2004 JDM Honda Civic Type R...
Guest
Thread
carbon
circuit
clio
electric
engine
evo
exhaust
fuel
grip
immaculate
manifold
racing
road
rolling
sport
steering
track
trophy
tyre
weight
wheel
good morining gents.
ok so on the 16th 264 is being treated to lots of new bits for its one year of owner ship birthday! but you'll all have to wait and see, whast been done. its a surprise!
however im having some plenum/inlet manifold indecision.
have any of you guys detailed yours?
i cant...
Gave her a good clean this weekend, installed tow eye and header tank, cleaned up the writing on the plenum a bit, and made a start on colour coding a few engine parts and dash strips.
Oh and stickers =]
Btw my car is not pink...
Yo
I've just booked my car in for its 36k at Angelworks in St Neots. It's being done next month.
I've also ordered some bits and bobs to be fitted at the same time - the standard brake upgrade package of Brembo HCs, DS2500s and braided lines. Got that lot for £250 delivered from K-Tec...
Just passing through and noticed some very useful discussions on this website so I thought I'd join! I hope I am not intruding!
I own a 206 GTi 180 myself, lightly modified running about 177bhp at the moment (just under 150whp). I wanted to find out how 172/182 owners have found modification on...
172
182
clio
decat
driving
ecu
engine
engines
evo
exhaust
fuel
great
inlet
manifold
megane
members
owners
performance
pressure
renault
speed
sports
standard
throttle
track
trophy
wanted
wheels
williams
The JMS Engine Works
- The Engine Works is the evolution of the popular JMS Tuning Stages.
- It is the essential choice for people looking for more punch from their standard car.
- It comprises of the essential modifications we have tried and tested too extract as much performance increase as...
Just recently my T has started making a few knocks and bangs, I have (what sounds like) the exhaust banging against the bumper when I go over any uneven road surface - but I don't think it is this due to the exhaust not moving much when you push it. Will have to investigate more!
But I was...
My original exhaust is pretty much rotten through now, and the left back box is rattling plus the clamp holding the cat to the main system is rotten and strangely has somehow become loose so that it rattles too?!
I've been looking around at what to replace it with and not really sure which way...
adjusting
clio
cliosport
decat
discount
driving
engine
exhaust
exhausts
forum
gears
great
manifold
noise
orbisoud
performance
renault
road
roads
service
speed
sport
sports
standard
trophy
Hi all,
After picking up the Trophy about 2 weeks ago now, I've finally had time to start a Trophy #383 thread after driving with a :mrgreen: everywhere
So here are some pics that I took when I first got the car home:
then I gave the car a good wash/wax after coming back from Sherbourne...
Guest
Thread
autoglym
cleaning
drive
driving
engine
exhaust
gears
manifold
meguiars
paint
racing
recaros
renault
road
standard
superb
suspension
trophy
wash
wax
Metallic Whine or Vibration on The Trophy At about 3000rpm on decelleration and acceleration in 2nd and 3rd gear. Maybe the heat shield touching the exhaust? Sounds like its coming from Underneath the car. Has anyone else experienced this? And ifso how much to rectify?
Cheers
Chris
has anyone fitted matched manifolds?
sport cams?
been looking at K-Tec ones and been debating it.
and de-cats?? who's got one has it made a difference and has everyone just pulled out the emissions light?
SharkyUK's RenaultSport Clio 182 Trophy
My RenaultSport Clio 182 Trophy is a limited editon model (with only 500 having been made) and the following images and narrative depict my ownership and experiences with this fantastic hot-hatch.
Service History and Maintenance
A few details of the...
Hi all,
Just been on ktec site, and they have matched inlet manifolds on an exchange basis.
http://www.k-tecracing.com/show_product.asp?id=2907
Have people done this mod on their cars at all ? Using 'angleworks' etc ??
Any benefits ? Plus I would of thought you'd have to use your own...
I just got my car back from the dealer after the following work:
-new gearbox
-new clutch
-new flywheel
-new driveshafts
-back to standard sachs dampers (original ones at the front, brand new at the rear)
This little lot was the result of accidentally clocking 2nd rather than fourth from the...
Ok Fellas
We need 5 people to get a custom map for £245 + vat instead of £345 + vat :o which is a great saving! :D
Ring RS tuning and pay your £50 deposit and then post back here when its paid once we have 5 or more we can then book in.
He can do 3 or 4 on one day or pick a day that suits...
Hi there, Big problems... I have just spent a couple of hours with my friend at his garage trying to line up this exhaust. everything is fine until we go to fit the last (right hand side) back box which the pushes everything of to the left almost touching the bumper!
He does tune cars for a...
ive just been on the k tech website and they now have a low presure turbo kit for all 182s, and they will take it to rs tuning in leeds for a custom remap (3 hours worth)it all cost around the 3k mark, on their graph is says its putting out 212 bhp and about 200 ib ft so that would put its power...
Hi all
Ive just recently fitted a cat-back RS192 and ever since the engine doesnt run properly when cold. At 1000-2000 revs when gently accelerating i.e. 10-20% throttle it pops and farts and doesnt want to go at all, but when the revs get up to 3ishk and above it springs back into life. this...
Hi all
Thought I would get registered on hereas i am looking for a Clio Trophy
I currenty drive a Mountune performance tuned Fiesta ST500 (even though it didnt stay looking likea ST500 for long)
Are ther eany certain things I shoud be looking out for if I actually find a minter for sale?
I...
Morning all !
ok so i got my Trophy Pretty much fresh out the box. taken the Acoustic Value off, getting some fat piping today. and i also getting the brakes done (discs lines fluid etc etc.)
ok so, i know that when it comes to Mods if you don't have a set plan, and you just fiddle, thats when...
It may not bother any of you or may say why bother but i was fed up of looking at the Renaultsport writing that is printed on top of the manifold. It was looking rather tatty and not what it should be so why the sun was i had a little play with it to see what i could do with it! Here is what it...
Should the manifold to cat connection have a nut on either side of the spring thing?
This is what I mean
Am I missing anything? reason being i'm trying to sort a metallic rattle when accelerating hard out.. I think its exhaust related but just trying to narrow it down :(
Ok,
I think this is a different one. Mine sounds fine until you go over the magic 3K rpm mark. Then as the engine revs go down towards 3k (decelerate) the exhausts rattles and moans alot. It stops at the 3K point on the way down too. The extra vibrations from this can be felt though the gear...
I've had this problem a few times on my Trophy now:
Sometimes when I drive it hard, and especially after hard braking, the throttle seems to stick - the revs will stay high even if I put the clutch in, and will even rise some times if I put the car in neutral. Also, I seem to be down on power...
Hey. :D
Ive just had these fitted to the Trophy along with the powerflex dogbone mount.
I decided to buy these mounts because while back I had my car put on the RR and I was shocked by the amount of movement from the Engine under acceleration and when backing off the pedal at high revs. The...
I bought trophy #406 recently and it came with a stainless steel exhaust system. Below are some pictures does anybody know what make it is? I want to get a decat pipe for it you see. It's got a straight through centre section, doesn't appear to be any brand markings on it, any help appreciated...