lighten the mood....

[Cue]

Some years ago, Paddy married an attractive woman, Maggie, half his age, in a small coastal Irish community.

After several months, Maggie complained that she had never climaxed during sex and according to her Grandmother all Irish women are entitled to a climax once in a while..
So, to resolve the problem, they went to see the Veterinarian since there was no trustworthy doctor anywhere in the village. The Vet didn't have a clue, but he did recall how, during the hot summer, his mother and father would fan a cow (with a big towel) that was having difficulty breeding. This would cool her down and make her relax.
So the Vet told them to hire a strong, virile young man to wave a big towel over them while they were having sex. This, the Vet said, would cause the young wife to cool down, relax, then climax.
So the couple hired a strong young man from Dublin to wave that big towel over them as the Vet suggested.

After many efforts, Maggie still had not climaxed so they went back to the Vet. The Vet said for her to change partners and let the young man have sex with her while Paddy waved the big towel.
They tried it that night and Maggie went into wild, screaming, ear-splitting climaxes, one right after the other for about two and a half hours.
When it was over, Paddy looked down at the exhausted young man and in a boasting voice said:

"And that, me auld son, is how ya wave a feckin' towel" :lol:

 

[shiftspark]

:lol:

 

[Sam_K]

How To Shower Like a Woman

Take off clothes and place them sectioned in laundry
basket according to lights and darks.

Walk to bathroom wearing long dressing gown.

If you see husband along the way, cover up any exposed areas.
Look at your womanly physique in the mirror - make mental note to
do more sit-ups / leg-lifts, etc.

Get in the shower.

Use face cloth, arm cloth, leg cloth, long loofah, wide loofah and
pumice stone.

Wash your hair once with cucumber and sage shampoo with 43 added
vitamins.

Wash your hair again to make sure it's clean.

Condition your hair with grapefruit mint conditioner enhanced.
Wash your face with crushed apricot facial scrub for 10 minutes until
red.

Wash entire rest of body with ginger nut and
jaffa cake body wash.
Rinse conditioner off hair.

Shave armpits and legs.

Turn off shower.

Squeegee off all wet surfaces in shower.

Spray mould spots with Tile cleaner..

Get out of shower.

Dry with towel the size of a small country.

Wrap hair in super absorbent towel.

Return to bedroom wearing long dressing gown and towel on head. If you
see partner along the way, cover up any exposed areas.



How To Shower Like a Man

Take off clothes while sitting on the edge of the bed and leave them in
a pile.

Walk naked to the bathroom.

If you see partner along the way, shake willy at her making the
'woo-woo' sound.

Look at your manly physique in the mirror.

Admire the size of your willy and scratch your bum.

Get in the shower.

Wash your face.

Wash your armpits.

Blow your nose in your hands and let the water rinse them off. Fart
and laugh at how loud it sounds in the shower..

Spend majority of time washing privates and surrounding area. Wash
your bum, leaving those coarse bum hairs stuck on the soap.

Wash your hair.

Make a Shampoo Mohican

Wee.

Rinse off and get out of shower.

Partially dry off.

Fail to notice water on floor because curtain was hanging out of bath
the whole time.

Admire willy size in mirror again.

Leave shower curtain open, wet mat on floor, light and fan on. Return
to bedroom with towel around waist.

If you pass partner, pull off towel, shake willy at her and make the
'woo-woo' sound again.

Throw wet towel on bed

 

[keith185]

http://www.youtube.com/watch?v=Ol69edqL8Rc

:wink: :lol:

 

[hoolio]

The REAL meaning of the Haynes instructions

Haynes: Rotate anticlockwise.
Translation: Clamp with molegrips then beat repeatedly with hammer anticlockwise. You do know which way is anticlockwise, don't you?

Haynes: Should remove easily.
Translation: Will be corroded into place ... clamp with adjustable spanner then beat repeatedly with a hammer.

Haynes: This is a snug fit.
Translation: You will skin your knuckles! ... Clamp with adjustable spanner then beat repeatedly with hammer.


Haynes: This is a tight fit.
Translation: Not a hope in hell matey! ... Clamp with adjustable spanner then beat repeatedly with hammer.

Haynes: As described in Chapter 7...
Translation: That'll teach you not to read through before you start, now you are looking at scary photos of the inside of a gearbox.

Haynes: Pry...
Translation: Hammer a screwdriver into...

Haynes: Undo...
Translation: Go buy a tin of WD40 (industrial size).

Haynes: Ease ...
Translation: Apply superhuman strength to ...

Haynes: Retain tiny spring...
Translation: "Crikey what was that, it nearly had my eye out"!

Haynes: Press and rotate to remove bulb...
Translation: OK - that's the glass bit off, now fetch some good pliers to dig out the bayonet part and remaining glass shards.

Haynes: Lightly...
Translation: Start off lightly and build up till the veins on your forehead are throbbing then re-check the manual because what you are doing now cannot be considered "lightly".

Haynes: Weekly checks...
Translation: If it isn't broken don't fix it!

Haynes: Routine maintenance...
Translation: If it isn't broken... it's about to be!

Haynes: One spanner rating (simple).
Translation: Your Mum could do this... so how did you manage to botch it up?

Haynes: Two spanner rating.
Translation: Now you may think that you can do this because two is a low, tiny, ikkle number... but you also thought that the wiring diagram was a map of the Tokyo underground (in fact that would have been more use to you).

Haynes: Three spanner rating (intermediate).
Translation: Make sure you won't need your car for a couple of days and that your AA cover includes Home Start.

Haynes: Four spanner rating.
Translation: You are seriously considering this aren't you, you pleb!

Haynes: Five spanner rating (expert).
Translation: OK - but don't expect us to ride it afterwards!!!
Translation #2: Don't ever carry your loved ones in it again and don't mention it to your insurance company.


Haynes: If not, you can fabricate your own special tool like this...
Translation: Hahahahahahahahahahahahahahahahahahahahahahaha!!!!

Haynes: Compress...
Translation: Squeeze with all your might, jump up and down on, swear at, throw at the garage wall, then search for it in the dark corner of the garage whilst muttering "******" repeatedly under your breath.

Haynes: Inspect...
Translation: Squint at really hard and pretend you know what you are looking at, then declare in a loud knowing voice to your wife "Yep, as I thought, it's going to need a new one"!

Haynes: Carefully...
Translation: You are about to cut yourself!

Haynes: Retaining nut...
Translation: Yes, that's it, that big spherical blob of rust.

Haynes: Get an assistant...
Translation: Prepare to humiliate yourself in front of someone you know.

Haynes: Refitting is the reverse sequence to removal.
Translation: But you swear in different places.

Haynes: Prise away plastic locating pegs...
Translation: Snap off...

Haynes: Using a suitable drift or pin-punch...
Translation: The biggest nail in your tool box isn't a suitable drift!

Haynes: Everyday toolkit
Translation: Ensure you have an RAC Card & Mobile Phone

Haynes: Apply moderate heat...
Translation: Placing your mouth near it and huffing isn't moderate heat.
Translation #2: Heat up until glowing red, if it still doesn't come undone use a hacksaw.

Haynes: Apply moderate heat...
Translation: Unless you have a blast furnace, don't bother. Clamp with adjustable spanner then beat repeatedly with hammer.

Haynes: Index
Translation: List of all the things in the book bar the thing you want to do!

Haynes: Remove oil filter using an oil filter chain spanner or length of bicycle chain.
Translation: Stick a screwdriver through it and beat handle repeatedly with a hammer.

Haynes: Replace old gasket with a new one.
Translation: I know I've got a tube of Krazy Glue around here somewhere.

Haynes: Grease well before refitting.
Translation: Spend an hour searching for your tub of grease before chancing upon a bottle of washing-up liquid. Wipe some congealed washing up liquid from the dispenser nozzle and use that since it's got a similar texture and will probably get you to Halfords to buy some Castrol grease.

Haynes: See illustration for details
Translation: None of the illustrations notes will match the pictured exploded, numbered parts. The unit illustrated is from a previous or variant model.


HAYNES GUIDE TO TOOLS OF THE TRADE
HAMMER: Originally employed as a weapon of war, the hammer is nowadays used as a kind of divining rod to locate expensive parts not far from the object we are trying to hit.

ELECTRIC HAND DRILL: Normally used for spinning steel Pop rivets in their holes until you die of old age, but it also works great for drilling mounting holes just above the brake line that goes to the rear wheel.

PLIERS: Used to round off bolt heads.

HACKSAW: One of a family of cutting tools built on the Ouija board principle. It transforms human energy into a crooked, unpredictable motion, and the more you attempt to influence its course, the more dismal your future becomes.

MOLE-GRIPS/ADJUSTABLE spanner: Used to round off bolt heads. If nothing else is available, they can also be used to transfer intense welding heat to the palm of your hand.

OXYACETELENE TORCH: Used almost entirely for lighting various flammable objects in your garage on fire. Also handy for igniting the grease inside a brake-drum you're trying to get the bearing race out of.

WHITWORTH SOCKETS: Once used for working on older cars and motorcycles, they are now used mainly for impersonating that 9/16 or 1/2 socket you've been searching for for the last 15 minutes.

DRILL PRESS: A tall upright machine useful for suddenly snatching flat metal bar stock out of your hands so that it smacks you in the chest and flings your beer across the room, splattering it against that freshly painted part you were drying.

WIRE WHEEL: Cleans rust off old bolts and then throws them somewhere under the workbench with the speed of light. Also removes fingerprint whorls in about the time it takes you to say, "F...."

HYDRAULIC FLOOR JACK: Used for lowering car to the ground after you have installed your new front disk brake setup, trapping the jack handle firmly under the front wing.

EIGHT-FOOT LONG DOUGLAS FIR 2X4: Used for levering a car upward off a hydraulic jack.

TWEEZERS: A tool for removing wood splinters.

PHONE: Tool for calling your neighbour to see if he has another hydraulic floor jack.

SNAP-ON GASKET SCRAPER: Theoretically useful as a sandwich tool for spreading mayonnaise; used mainly for getting dog-doo off your boot.

BOLT AND STUD EXTRACTOR: A tool that snaps off in bolt holes and is ten times harder than any known drill bit.

TIMING LIGHT: A stroboscopic instrument for illuminating grease buildup.

TWO-TON HYDRAULIC ENGINE HOIST: A handy tool for testing the tensile strength of ground straps and brake lines you may have forgotten to disconnect.

CRAFTSMAN 1/2 x 16-INCH SCREWDRIVER: A large motor mount prying tool that inexplicably has an accurately machined screwdriver tip on the end without the handle.

AVIATION METAL SNIPS: See hacksaw.

INSPECTION LIGHT: The mechanic's own tanning booth. Sometimes called a drop light, it is a good source of vitamin D, "the sunshine vitamin," which is not otherwise found under cars at night. Health benefits aside, its main purpose is to consume 40-watt light bulbs at about the same rate as 105-mm howitzer shells during the Battle of the Bulge. More often dark than light, its name is somewhat misleading.

PHILLIPS SCREWDRIVER: Normally used to stab the lids of old-style paper- and-tin oil cans and splash oil on your shirt; can also be used, as the name implies, to round off Phillips screw heads.

AIR COMPRESSOR: A machine that takes energy produced in a fossil-fuel burning power plant 200 miles away and transforms it into compressed air that travels by hose to a pneumatic impact spanner that grips rusty bolts last tightened 30 years ago by someone in Dagenham, and rounds them off.

PRY (CROW) BAR: A tool used to crumple the metal surrounding that clip or bracket you needed to remove in order to replace a 50 pence part.

HOSE CUTTER: A tool used to cut hoses 1/2 inch too short.