After some part numbers for some new sensors.

[Dsturbed]

hi all fellow Trophy owners, still got mine, nearly owned it for 9years now.

Anyway, I know you guys (or some of you ) have part numbers off the proper Renault parts software and was wondering if you could tell me the correct part numbers for the following:-

what I am after is the sensor on the top of the intake manifold (plastic angled - air intake temp sensor I think) and the one lower down on the right hand side of engine (guessing this is the engine temp sensor).

can anyone help?

and if anyone knows anyone selling a set of front Sachs - please let me know.

Thanks.

 

[MarcB]

Dont buy these direct from renault as they are so expensive.
You can get aftermarket units from ebay or second hand units in working order.

Item 2 - Map Sensor



Item 3 - Temp Sensor

 

[Dsturbed]

Thanks Marc- the second item is what I'm after the MAP sensor isn't the one I was thinking off - I'm on about the sensor that is on the right hand side of block lower down than the air temp sensor.

do you know which sensor measures engine temp? - I was havingsomeprobs last year with the engine cutting out and dashboard temp needle going crazy- hasn't done it since mind. But though i would replace anyway.

ta.

 

[Dsturbed]

Also have you got the numbers for the Fuel rail guard bolts/studs. thanks Marc.

where do all you guys buy your parts/spares?

 

[MarcB]

Coolant Temp Sensor thats in the Thermostat Housing.

Here is here mate -

























The OE Part number has changed so you can give them the one from the bag above or this one from the renault system.

Its Item Number 20 on the picture below.

 

[MarcB]

Also have you got the numbers for the Fuel rail guard bolts/studs. thanks Marc.

where do all you guys buy your parts/spares?

Fuel Rail Screws are item number 11 and i personally buy 95% of my parts genuine from renault or get them second hand renault items from people breaking clio 172/182s

 

[Dsturbed]

Nice one mArc,
how much coolant did you drain before removing the coolant temp sensor?

Thanks again