Joined
Oct 18, 2006
Messages
5
Reaction score
0
Location
Newcastle
Guys what are the standard headlamp bulbs on the trophy, my drivers side needs replacing, not sure what type i need, also how hard is it to fit?

HELP'D be great thanks Guys!
 
Joined
Feb 10, 2007
Messages
678
Reaction score
0
Location
Middlesbrough
Take the black platic cover off, pull the wire off the back of the headlight bulb, undo the spring retaining clip and remove the bulb.

Remember DO NOT touch the glass part of your new bulb - hold it by the metal
 
Joined
Jul 27, 2006
Messages
6,211
Reaction score
813
Location
OXFORD
Trophy No.
307
DaveTrophy said:
Take the black platic cover off, pull the wire off the back of the headlight bulb, undo the spring retaining clip and remove the bulb.

Remember DO NOT touch the glass part of your new bulb - hold it by the metal

depends which bulb it is.
 
Joined
Jul 27, 2006
Messages
6,211
Reaction score
813
Location
OXFORD
Trophy No.
307
I cant remember if that is the inside or outside bulb, both have a rubber seal that you pull off, the outside one you need to twist can't remember if it's clockwise but i think so then pull it out with the lead still attached, remove bulb. The inside bulb you will need to remove the lead first then push the sprung wires in and together, bulb should then just fall out.
Hope that helps.
 
Top