I've done a search, but not been able to find much information. My car is in limp mode, due to active faults no doubt, which limits it to 3000rpm and gives an idle anywhere from 2-2500rpm. From what I've read some of these faults can be due to poor wiring connections though someone may also help me identify which connections and where, or if there are parts that commonly fail and cause these faults:
DF308 - Active - Bi-mode air inlet solenoid valve, open circuit (is this somewhere in the NSF wing?)
DF129 - Active - Pedal potentiometer circuit incoherence between track 1 & 2
DF135 - Memory - Brake pedal sensor circuit
DF254 - Memory - Motorised throttle control
DF235 - Memory - Cruise Ctrl/speed limiter steering wheel controls (I played around with these when I first collected the car, but thought I needed to read the instructions, could be one of the contacts is worn/dirty)
Cheers
Ant
DF308 - Active - Bi-mode air inlet solenoid valve, open circuit (is this somewhere in the NSF wing?)
DF129 - Active - Pedal potentiometer circuit incoherence between track 1 & 2
DF135 - Memory - Brake pedal sensor circuit
DF254 - Memory - Motorised throttle control
DF235 - Memory - Cruise Ctrl/speed limiter steering wheel controls (I played around with these when I first collected the car, but thought I needed to read the instructions, could be one of the contacts is worn/dirty)
Cheers
Ant