Hunting/Searching at Idle

Joined
Jun 28, 2020
Messages
86
Reaction score
54
Trophy No.
162
As per the title #162 is hunting when idling when cold and up to temp.

I don't recall being told by Steve (the previous owner) that it had any modifications (high-lift cams) etc. but I don't think it's down on power. Regardless, my first thought is gummed up injectors as she hasn't covered many miles in recent years; anyhow I've ordered a to do some testing and I'm sure she'll be running perfectly soon.

Before I get stuck in, does anyone have any advice or experience of this, please?
 

Cue

Joined
May 18, 2006
Messages
6,607
Reaction score
163
Location
Republico Yorkshire
Trophy No.
274
Could be a few things, what do you mean by hunting though? if reving slightly higher - this is normal and part of the 182's engine warm up sequence for the first minute or so after being ignited.

If you're referring to fluctuating revs between say 600 and 2k, it could be anything from the inlet to injectors. If the actuator value hasn't been cleaned recently - i'd start with that as its an easy fix if its this. A couple of bolts (fixes on the side of the inlet manifold), spray some WD40, unclog, clean the gunk etc, then re-attach.
 
Joined
Jun 28, 2020
Messages
86
Reaction score
54
Trophy No.
162
Thanks for this @Cue

Definitely fluctuating rather than the warm-up sequence. I'll start with the actuator valve as suggested :)
 
Joined
Sep 5, 2020
Messages
12
Reaction score
12
Thanks for this @Cue

Definitely fluctuating rather than the warm-up sequence. I'll start with the actuator valve as suggested :)

Hey @will2705 mine developed this issue today: warm engine, revs fluctuating pretty wildly between 900 & 2000 rpm.
Did the actuator valve clean sort the problem?
Thanks!
 
Joined
Jun 28, 2020
Messages
86
Reaction score
54
Trophy No.
162
Hey @HowieUK ,

Mine wasn't doing it nearly that much, it just sounded a little like it had high-lift cams on it. After doing some research (a few kind owners agreed to send me videos of what their T's); I realised mine was in was normal - as suggested above. So I never got round to cleaning to the actuator valve. This is something I'll do regardless once the underside work has finished.

Sorry I couldn't be more help.
 
Joined
Sep 5, 2020
Messages
12
Reaction score
12
Ok, cheers for letting me know anyway. I’ll clean the air filter and throttle (carefully!) then head up to Mark Fish if that doesn’t remedy it.
Thanks
 
Top