Frayz’s Inferno orange 182 - Back in the old flame

Joined
May 19, 2019
Messages
614
Reaction score
702
Location
Essex
Little job I’ve wanted to do was renew the tired old gear knob.
The top of the original was smooth with printed H pattern. However these are no longer available from Renault so I have one with an embossed H pattern.
I’d read that these were a nightmare to get off, but I was in luck as this whole job took me about 30 min.
Much improved I’m sure you will agree.

3A4E6B0F-2EA8-455E-B942-5C673BEEF02B.jpeg
21AC1D92-AF78-492A-81D7-6275B088ED91.jpeg
A966462E-5516-4DBA-8751-4F67168B0B88.jpeg
 
Joined
May 19, 2019
Messages
614
Reaction score
702
Location
Essex
Today’s fix - Climate control

In the early days of having the car back, one day I put the heater on high in the morning and when attempted to drop the temp as the cabin warmed up it strangely continued to chuck out hot air. Even with the AC on full and previously the AC was ice cold.
Oddly enough the next day it was working fine, so whatever the issue, it was intermittent and needed investigation.
I suspected it was something to do with the stepper motor on the heater matrix and a quick search had shown others had suffered a similar fate.
This evening I managed to get time to remove the stepper motors, these are a bit of a twat to get to as they’re tucked up under the drivers dash area. Upon removing the motors, sure enough the drive lug had broken right through.
Lucky enough I had a sprung hose clamp that was exactly the correct size. It’s super strong now and I dare say the motor would now fail before the drive lug would ever break again.

Boxed it back up and Roberts ya mother’s brother, winning. :D

DAD5F23A-4F1A-4E25-9545-9D9917C1AD07.jpeg9AEB5587-8039-4110-9ED8-4A62DDC10003.jpeg
 
Joined
May 19, 2019
Messages
614
Reaction score
702
Location
Essex
Tonight’s job,
Update the exhaust brackets with some newly fabricated stainless items and fit the PhillipM honeycomb exhaust Bush.

The mounts are a known point for corrosion and are NLA from Renault. When they were available they were apparently £110 a piece and the 182 needs a pair of them. Luckily a lad on the ClioSport group had a small batch fabricated in stainless and black powdercoated. As you can see, my old ones weren’t actually in that bad shape, but all stuff on the car has a life and now seemed as good a time as any to update them.

Also took this opportunity to fit a new honeycomb exhaust Bush. The standard bushes from Renault are frankly a joke, I’ve seen more robust dried flowers in my time.
When I first owned the car, there wasn’t any other option but try and fudge something yourself or keep buying the pants OEM stuff.
Years ago I cut out most of the old mount and put a universal poly exhaust hanger in with some zip ties.
To be fair this has stood up for the last 7 years or so. However because it’s solid, you do manage to make the boot floor in to a bit of an amplifier and the NVH comes right into the cabin.
Now there’s a better solution with the honeycomb Bush, I thought I’d fit one. I must have gotten used to the sound inside the car because this has made a significant reduction in resonance inside the cabin.
D8BEF203-981F-44AA-8F33-7754FFE074BE.jpeg92021875-A905-4339-BCA1-633D13BE1CC0.jpeg602E1AD9-B435-4216-93C8-DFEC07CB128E.jpeg53BDEADB-C1BD-4D47-BD0D-FE3105FE8476.jpeg5D1160AE-9D5F-46BA-8C0F-EE2299E00217.jpeg108AB206-1E80-4D01-926C-D68862E2F5E2.jpeg2C4FD770-E4A8-4933-B43E-45EFE76EF8ED.jpegE92D950C-E7B0-43E1-981C-46C4B90F128F.jpeg
 
Joined
May 19, 2019
Messages
614
Reaction score
702
Location
Essex
Looks really clean underneath.

Cheers chap. Not too sad for a 115k mile daily. I haven’t cleaned it underneath properly though, just get the jet wash under there occasionally to get the worst off.
It’s on my “to do” list though. Along with a million other jobs ?
 
Joined
Mar 7, 2010
Messages
403
Reaction score
79
Mine needs some work underneath this winter as the front jack points were bent over and could do with a new underseal and possible a few bits re powder coated
 
Joined
Mar 7, 2010
Messages
403
Reaction score
79
115k and 14 year old and looks better than most 3 year old vw's
 
Joined
May 19, 2019
Messages
614
Reaction score
702
Location
Essex
Mine needs some work underneath this winter as the front jack points were bent over and could do with a new underseal and possible a few bits re powder coated

I’ve got everything ready to go to get the skirts off and Bilt Hamber the sill areas.
It’s just getting the right time to do it.
My jacking points were absolutely flawless as were my sills. However some bellend in my friends tenure decided to use both front sills to jack the car. I’ve straightened them but not fully yet. I’ll do it when I do the protection.
 
Joined
Mar 7, 2010
Messages
403
Reaction score
79
It seems like it's to hard for people to jack a car up without damaging it.
 
Joined
Mar 7, 2010
Messages
403
Reaction score
79
I need to rent a ramp for a week or so then I can get everything off sent away for coating while I do the underside. I have a feeling it's going to be a expensive winter.
 
Joined
May 19, 2019
Messages
614
Reaction score
702
Location
Essex
Shouldn’t be too bad if you’re doing all the labour and prep. My issue is it’s my daily car. I need it for work and it does 50 miles a day.
Not like I can use public transport or cycle. It’s 100% about doing preventative maintenance on these cars now though while you can.
 
Joined
Mar 7, 2010
Messages
403
Reaction score
79
I like to see people still using them as a daily. Mine was bought for a European trip in September then should only do a couple of thousand a year after this year as i have a transit custom for work.
 
Joined
May 19, 2019
Messages
614
Reaction score
702
Location
Essex
Well mines not a Trophy. Just a council spec 182FF. ?
 
Joined
Mar 7, 2010
Messages
403
Reaction score
79
So is mine at the moment got the dampers off for a refurb and running cup dampers and springs but still loving it all the same
 
Joined
May 19, 2019
Messages
614
Reaction score
702
Location
Essex
Still not convinced on the new gear knob top. It doesn’t feel quite right with the embossed letters. So playing with silvers to try and replicate the OEM Renault shade for the 182.
I’ll add a decal to this and lacquer it in.

7E2E9E0E-2AA9-4F23-8613-357B6272951E.jpegA1A4728A-20CD-457C-84EB-799581C9AF4C.jpeg
 
Joined
Mar 7, 2010
Messages
403
Reaction score
79
Looks good to me! what's wrong with yours as I must of missed what had happened
 
Joined
May 19, 2019
Messages
614
Reaction score
702
Location
Essex
Looks good to me! what's wrong with yours as I must of missed what had happened

I fitted a brand new Renault leather one. However I’m not feeling the embossed top, so trying to refinish my original silver insert to how it was. My old one was worn out. If you check on the last few posts you’ll see what I mean.
 
Top