Alpine V12 MPV-F307 Amp 4/3/2 channel amlifier very powerful in full working order cost loads sell for just £55 for quick sale delivered to uk only!!
spec
4/3/2 Channel Power Amplifier
Features
General-Amplifiers
Darlington Bi-Polar Outputs
Auto Overcurrent Protection
Bass Engine Ready
4/3/2 Channel Operation
Adjustable Crossover (HP/LP)
Input Mode Selector Switch
One side Terminal Layout
Gold Plated RCA Input Connectors
Speaker Level Inputs
Noise Elimination Coil
MOSFET Power Supply
DC-DC PWM Power Supply
Discrete Pre-Amp Stage
DC Straight Design
STAR Circuitry
Solid Copper Bus Bars
MultiMode
Top Mounted LED Power Indicator
Gold Plated Insert Power Terminals
Specifications
MAX Power (at 14.4V,EIAJ)
Per channel into 4 ohms- 90W x 4
Bridged 4 ohms- 240W x 2
Per channel into 2 ohms-
RMS Power (at 12V,20Hz-20kHz)
Per channel into 4 ohms- 30W x 4 (0.08% THD)
Per channel into 2 ohms- 40W x 4 (0.3% THD)
Bridged 4 ohms- 80W x 2 (0.3% THD)
RMS Power (at 14.4V,20Hz-20kHz)
Per channel into 4 ohms- 50W x 4 (0.08% THD)
Per channel into 2 ohms- 60W x 4 (0.3% THD)
Bridged 4 ohms- 120W x 2 (0.3% THD)
General-Amplifiers
Heat Sink (WxHxD)in- 10-5/8O x 10-1/4O x 2-3/8O
Foot Print (WxHxD)in- 10-5/8O x 11O x 2-3/8O
Slew Factor- greater than 5
Input Impedance- 10k ohm
Speaker Impedance- 4 or 2 ohms(stereo), 4 ohms(bridged)
Dividing Network- 50Hz-200Hz HP/LP (12dB/oct)
Power Requirements- 14.4V DC (11V to 16V)
Heat Sink (WxHxD)mm- 270mm x 260mm x 60mm
Foot Print (WxHxD)mm- 270mm x 280mm x 60mm
Weight- 4.2kg(9lbs. 4oz.)
Frequency Reponse- 10Hz - 50kHz (+0, - 1dB)
Signal to Noise (S/N)- 100dBA (referenced to rated power)
Input Sensitivity (for rated power)- 200mV ~ 4.0V
£55 for quick sale delivered to uk only!!
spec
4/3/2 Channel Power Amplifier
Features
General-Amplifiers
Darlington Bi-Polar Outputs
Auto Overcurrent Protection
Bass Engine Ready
4/3/2 Channel Operation
Adjustable Crossover (HP/LP)
Input Mode Selector Switch
One side Terminal Layout
Gold Plated RCA Input Connectors
Speaker Level Inputs
Noise Elimination Coil
MOSFET Power Supply
DC-DC PWM Power Supply
Discrete Pre-Amp Stage
DC Straight Design
STAR Circuitry
Solid Copper Bus Bars
MultiMode
Top Mounted LED Power Indicator
Gold Plated Insert Power Terminals
Specifications
MAX Power (at 14.4V,EIAJ)
Per channel into 4 ohms- 90W x 4
Bridged 4 ohms- 240W x 2
Per channel into 2 ohms-
RMS Power (at 12V,20Hz-20kHz)
Per channel into 4 ohms- 30W x 4 (0.08% THD)
Per channel into 2 ohms- 40W x 4 (0.3% THD)
Bridged 4 ohms- 80W x 2 (0.3% THD)
RMS Power (at 14.4V,20Hz-20kHz)
Per channel into 4 ohms- 50W x 4 (0.08% THD)
Per channel into 2 ohms- 60W x 4 (0.3% THD)
Bridged 4 ohms- 120W x 2 (0.3% THD)
General-Amplifiers
Heat Sink (WxHxD)in- 10-5/8O x 10-1/4O x 2-3/8O
Foot Print (WxHxD)in- 10-5/8O x 11O x 2-3/8O
Slew Factor- greater than 5
Input Impedance- 10k ohm
Speaker Impedance- 4 or 2 ohms(stereo), 4 ohms(bridged)
Dividing Network- 50Hz-200Hz HP/LP (12dB/oct)
Power Requirements- 14.4V DC (11V to 16V)
Heat Sink (WxHxD)mm- 270mm x 260mm x 60mm
Foot Print (WxHxD)mm- 270mm x 280mm x 60mm
Weight- 4.2kg(9lbs. 4oz.)
Frequency Reponse- 10Hz - 50kHz (+0, - 1dB)
Signal to Noise (S/N)- 100dBA (referenced to rated power)
Input Sensitivity (for rated power)- 200mV ~ 4.0V
£55 for quick sale delivered to uk only!!