top mounts and bearings
- Thread starter Chris84
- Start date
I’m a bit lost with this and I’m starting to question if I even have the correct top nuts- I have genuine Renault’s top mounts fitted but can someone tell me what the nut is -
View attachment 33647
If the nut pictured is a separate item from the top cap, it is from the updated modification kit 543A09780R.
It should not make contact with the top of the turret if everything is assembled correctly.
Attachments
photo_ed
ClioTrophy Club Member
- Joined
- Jul 22, 2018
- Messages
- 1,428
- Reaction score
- 2,549
- Location
- Yorkshire/Lancashire
- Trophy No.
- 407
Is that 'Barn Find Dust'?
photo_ed
ClioTrophy Club Member
- Joined
- Jul 22, 2018
- Messages
- 1,428
- Reaction score
- 2,549
- Location
- Yorkshire/Lancashire
- Trophy No.
- 407
Can someone just confirm the correct orientation of the thrust bearing please?-
Thanks, if anyone wants to back that up please go ahead.
For what it's worth the bearings definitely want to fit nicely in that way, they're on the tight side the other way.
For what it's worth the bearings definitely want to fit nicely in that way, they're on the tight side the other way.
NickReilly063
ClioTrophy Club Member
This is what went on mine - they look old style too to me -
I was meaning the bearing orientation only.
Patrick, as you say the thrust bearing sits easier with the flat side sitting on top the spring plate.
Nick, yours is different again to the version in my pic, which is the original. You have the bearing that sits on the spring plate, then the doughnut sits on that. The brass insert then slides inside the doughnut and the whole assembly is then secured to the damper with that little ring nut. The “top hat?” Is then screwed onto the damper end once it is raised through the turret.
Nick, yours is different again to the version in my pic, which is the original. You have the bearing that sits on the spring plate, then the doughnut sits on that. The brass insert then slides inside the doughnut and the whole assembly is then secured to the damper with that little ring nut. The “top hat?” Is then screwed onto the damper end once it is raised through the turret.
NEITHER.
The doughnut is NOT part of the assembled strut, and frequently remains in the underside of the turret when removing said strut.
Please read post 35 again.
The correct order is spring cap, then the bearing with the numbers out of sight against the spring cap, followed by which ever 14mm thread size spacer and nut ( old style ), or 1 piece spacer nut ( new style ) is being used.
This is so the bearing is not preloaded.
These are the correct original parts.
That is the modified kit 543A09780R, for some reason it does not include the replacement 1 piece spacer/nut 8200867250 that is required for it to function.
Attachments
Always open to be corrected but are you sure about the doughnut not being part of the assembly?
Totally.
Just consider it in terms that the doughnut is part of the bodyshell, and that bodyshell just rests on the bearing.
Once the top cap is removed, the whole strut usually drops out, leaving the doughnut in place in the turret.
Not sure where the confusion is coming from here- either we must be talking about different things or all the exploded diagrams, every photo I've ever seen of a strut assembly in 10 years of ownership and that tutorial video hoolio has just posted are wrong...which seems unlikely.
Regardless of what you want to call them, one way or another the bearing goes between these two parts and it faces one of two ways, which was my query-
Post 35 describes the order of the diagrams so can only assume there's a mix-up in terminology-
Preassemble the shock, spring, spring cap, bearing, rubber cushion, and 27mm spacer nut, and offer the whole assembly up into the turret.
Regardless of what you want to call them, one way or another the bearing goes between these two parts and it faces one of two ways, which was my query-
Post 35 describes the order of the diagrams so can only assume there's a mix-up in terminology-
Preassemble the shock, spring, spring cap, bearing, rubber cushion, and 27mm spacer nut, and offer the whole assembly up into the turret.
The hole in the centre of doughnut is of sufficient diameter that there is nothing to prevent it`s removal or addition with the bearing, spacer and nut already in place.
I agree.
I`m not sure how supposedly grown men can make something so simple, so difficult.
You pictured the bearing on the wrong side of the doughnut or rubber cushion or whatever you want to call it.
And you will not need spring clamps either.