OSR ABS sensor for #249

[Greatwhyte]

HELP!

Anyone have a working spare one?

My almost complete Project is on hold at present as my trusted mechanic says he hasn't found one of these and Reault UK don't currently have one. I know they are Trophy specific.

 

[dablk]

trophy specific? are you sure? there are loads on eBay you just need to make sure you get the correct male /female plug or socket version.

 

[dablk]

You will struggle to find a 2nd hand rear abs sensor on the 182 as nearly every time it has to be destroyed to get it out.

 

[BenG]

You can buy them from Kam Racing or Renault Parts Direct.

http://www.cliotrophy.co.uk/threads/clio-trophy-part-numbers.53897/

ABS Sensor (NSR) 6000073527
ABS Sensor (OSR) 6000073528

They're quite expensive.

You can buy aftermarket ones from Euro Car Parts but i'm not sure about fitment, reliability etc..

 

[Greatwhyte]

You can buy them from Kam Racing or Renault Parts Direct.

http://www.cliotrophy.co.uk/threads/clio-trophy-part-numbers.53897/

ABS Sensor (NSR) 6000073527
ABS Sensor (OSR) 6000073528

They're quite expensive.

You can buy aftermarket ones from Euro Car Parts but i'm not sure about fitment, reliability etc..

Thanks, Euro Car Partskeep sending 182 ones which don't fit

 

[dablk]

Plugs the wrong way round by any chance?

 

[Greatwhyte]

The ones euro send are completely wrong not just plugs wrong way.
I am struggling to find one new or used TBH.

 

[dablk]

Hope you do get sorted..
a tip for anyone else.

wheel off, caliper off, disc off (new hub nut should be used and dont loose your spacer.)
Now at this point the arse of a job is the 3 large and 1 smaller torx head bolts with totally rottent threads and bolts on the other side. for the on your own DIy'er at home it's a terrible job which left me with a loose bolt i had to hacksaw out..
I then noticed if you just shaved a little off the top edge of the rear beam with an angle grinder you could smash the old abs sensor out and have enough room to get a new one in. Thus saving messing taking the rear stub axle off at all.

 

[BenG]

PMS sell the Axle Beam to Hub mounting bolts for £10.

 

[dablk]

Yep, perfect photo Ben,
As Ben says if you can get them out anyway you can, great.

if not you can shave the very top and giveyourself enough room to slide a new one in with out touching the stub axel. The unseen in bens photo part of the sensor is long. so it needs to slide in straight.

 

[Greatwhyte]

Hunted high and low.
Only one I could find was a used one on ebay from Australia!!!!!!!

Hope it doesn't take a month to arrive!!