Any idea where to get replacement clips for this? Recently had the washer nozzles replaced and this one keeps popping out, it’s infuriating.
Front washer pipe retaining clip
- Thread starter Patrick Bateman
- Start date
Mike256
ClioTrophy Club Member
- Joined
- Mar 17, 2024
- Messages
- 309
- Reaction score
- 457
I've been looking myself for exact replacements and can only find some via breakers yard.
If you're happy with something that isn't oem you need wire loom routing clips. Something like this - https://a.aliexpress.com/_EuZWrjy
If you're happy with something that isn't oem you need wire loom routing clips. Something like this - https://a.aliexpress.com/_EuZWrjy
- Thread starter
- #3
I’m tempted to use a small blob of silicone.
- Thread starter
- #4
Well silicone was a big fat waste of time.
Have you had any joy yourself yet?
Have you had any joy yourself yet?
photo_ed
ClioTrophy Moderator
- Joined
- Jul 22, 2018
- Messages
- 2,294
- Reaction score
- 4,468
- Location
- Yorkshire/Lancashire
- Trophy No.
- 407
Try one of the breakers?
Renparts? That Callum lad - can't remember the name of his operation, but these should have small bits like this.
Renparts? That Callum lad - can't remember the name of his operation, but these should have small bits like this.
- Thread starter
- #6
I’ll have a nosey although I see Renparts are no longer on the go.
- Thread starter
- #7
Think the main issue here is the hose itself is just a bit too loose now on the washer nozzle nipple.
Waiting on a response from a breaker for the retainer clip but can anyone recommend particular replacement hose?
I've found this OEM stuff but £30 is taking the fuckin piss surely? https://www.ebay.co.uk/itm/267632895888
Waiting on a response from a breaker for the retainer clip but can anyone recommend particular replacement hose?
I've found this OEM stuff but £30 is taking the fuckin piss surely? https://www.ebay.co.uk/itm/267632895888
Last edited:
photo_ed
ClioTrophy Moderator
- Joined
- Jul 22, 2018
- Messages
- 2,294
- Reaction score
- 4,468
- Location
- Yorkshire/Lancashire
- Trophy No.
- 407
Given the prices I’m being faced with to refresh the front suspension of my 200 Cup, 30 quid for some bits of plastic seems very reasonable..
- Thread starter
- #9
Been there and done it with the Trophy, have spent so much on the wee bastard in the last 4 years I'd like to catch a small break on only 2-3ft of rubber tubing I need though!
- Thread starter
- #10
Maybe a bit more to this bloody clip than initially thought, got this back from Renomotive-
best bet would be trying to get someone to 3D print something as the clip is not designed to be pulled out from the face. Pretty much single use unfortunately. Without cutting up a bonnet to squeeze the clips together you don't have access to remove it.
best bet would be trying to get someone to 3D print something as the clip is not designed to be pulled out from the face. Pretty much single use unfortunately. Without cutting up a bonnet to squeeze the clips together you don't have access to remove it.