Joined
Feb 5, 2007
Messages
172
Reaction score
1
Location
Locarno, Switzerland
Hi
I will change my steering wheel with a new one (Toora competitione "pole").
b725_1.jpg
I would like also to ask if there is a guide with pictures about how to remove the steering wheel with the Airbag, how to fix the resistence (how many ohms?) to switch off the warning light on the dash board.

if there is a guide, let me know and after delete this post.

thank you guys

Luca
 
Joined
Aug 27, 2007
Messages
526
Reaction score
19
Location
N. Wales
No guide here to my knowledge, but you should get a resistor with the mounting boss to disable the airbag light that plugs/pushes into the airbag connector.
 
Joined
Feb 5, 2007
Messages
172
Reaction score
1
Location
Locarno, Switzerland
thank you Keith185

I know I need a resistor but I don't know how many Ohms.
On another forum, a guy doesn't use a resistor but a small fusible 30A, it will works?

bye
luca
 
Joined
Feb 5, 2007
Messages
172
Reaction score
1
Location
Locarno, Switzerland
I would like to ask you how can I do to remove my steering wheel, I think I have to remove from the top the center side of steering wheel, how?

and after, how many cables are connected on the bottom of center side removed? How many cables need to be fixed with a resistence (airbag? claxon? speed control?) or with a fusible 2 or 3 A (not 30 as written in the last post)

Thanks for give me some usefull information.
bye
Luca
 
Top