280mm 197 brembo conversion using bell and rotas

Joined
Jan 19, 2014
Messages
1,514
Reaction score
460
Location
Warrington...leaving the club
This is a full kit.

197 Brembos, fully refrubed, Milled down to the correct spec for the 280mm Chris Powell Brackets
obv... chris powell 280mm brackets
new stainless steel pins and pad retainers
opened but never used M1144 pads
S/h Custom Alloy bell and 283mm rotas . orginally used brefly by phase1tom. still loads of rota left and wider than standard clio 182 discs to work better in the 197 caliper
Brand new Custom length goodridge front hoses. These are 172/182 fitment to 197 cliper and are measured to work better. Just using 197 hoses means they are too long on a mk2 and have to be tied back.

Some pics when i was test fitting on spare hubs
D8CACA8D-A00F-4485-87C9-C120313021FC_zpsutlzjyah.jpg

88A09AB7-530C-4A98-B65E-361D327E9EE9_zpsdhu1ty1i.jpg

£700 collected or postage extra and payment by PPG or add the fees

I cant help with evry fitmant option. trophy et45 wheels will require min of 8-10mm spacers. I was going to mill down some 15mm hub centrics.
cup et 38.5mm i belive clear fine. I cant advise on anythign else.

I can add the eibach 15mm hub centrics that have never been used bar to line up in pics on the t120 thread. for another £30

Cheers
Chris
 
Top