#108 For Sale

Joined
Mar 31, 2009
Messages
379
Reaction score
4
Clio 182 Trophy No. 108

After 7 years of ownership I am reluctantly selling my much loved Trophy. It has received nothing but the best treatment in its life, and is a truly superb example of the car.


She has travelled just 58,500 miles, and this will remain roughly the same till sold. A full and comprehensive service history is included, I have a record and receipt of every item purchased and work carried out on the car since my ownership. Exceeding £12k after the purchase price. I am able to email a copy of the spreadsheet that the work is listed on request. There have been no engine or management modifications, just the addition of an ITG panel filter. The Auxiliary and Timing belts were replaced in 2009 at 28k miles, and again in 2015 at 57k miles, with the addition of replacing the water pump and dephaser pulley, all genuine Renault parts. The gearbox oil was changed at the same time. Engine oil has been Fuchs Titan Supersynth 5W-40 changed every year, and it’s just been done ready for the sale.


I fitted a stainless steel cat back exhaust from BTB Exhausts of Daventry, one of just a handful the company produced, and is a truly superb piece of workmanship. A group buy meant the one off production cost of £1500 for the piece was reduced substantially. Mark Fish of Harlow then modified the original Cat, to remove the restriction and is now a 2.5” diameter exhaust all the way through. Last year I removed the exhaust and waxed the underneath of the boot floor and rear suspension parts, I sent the exhaust hanger brackets off to be blasted and powder coated and gave the rear callipers a fresh lick of red. It has like-new exhaust hangers, and the downpipe to cat fittings have just been replaced. Oh, I also polished the backboxes for good measure!


The famous Sachs suspension on the front of the car was refurbished by BG Motorsport in 2013 at 53k miles and fitted with new adjusters so they can actually be adjusted if required. These are matched with a set of Mark Fish springs which lower the front a smidge and stiffen things up slightly. At 42k miles, I fitted a set of Koni adjustable dampers on the rear, and a set of springs from Mark Fish. These lower the rear to match the ride height of the front and make for a sharper drive. I have the original springs to go with the sale of the car, plus the original rear dampers and a set of cup dampers for temporary measure when the Sachs have work done. The front wishbones and anti-roll bar have been fitted with polyurethane bushes. The suspension has just been inspected and adjusted by Mark Fish and given the all clear after replacing a suspect lower ball joint. In order to relieve the need for fitting camber bolts, Mark Fish made a groove in the drivers side damper bolt hole to allow enough adjustment to correct the camber. This allows the much stronger standard bolts to be used. It was also discovered that the KTEC solid top mounts that were fitted were not allowing the dampers to move like they needed, so they were replaced with standard items which make the car much better to drive.


Number 108 is possibly even more rare than the others, as it may be the only one that did not come with a factory fitted alarm, or any of the cut outs in the trim for sensors. Because of this I had a Clifford Avant Guard category 1 alarm fitted, and a Tracker which can be transferred to the new owner.


The car is cleaned of tar, clayed, polished and waxed in the spring, and sealed for the winter, every year. Last winter I bought a Stormforce cover for it so it was wrapped up during the nasty weather, which I will include with the sale. I have cleaned and waxoyl’d the rear arches and beam for extra winter protection. The Clio badge on the boot lid has been removed, the two holes that were left have been welded, filled and the boot lid re-sprayed with a 197 badge fitted, done by Kream Developments of Rainham a few years back. The work was amazing, so it’s just been back in to Kream to have a freshen up. I had a small dent on the boot which was done by accident involving a piece of wood, and when I bought the car there was a graze on a rear arch which Renault repaired, but over the years this patch has shown up the car slightly. Because of that, plus some small car park knocks, and to ensure colour match, it resulted in the rear half of the car being repaired and resprayed - boot lid, bumper, both three quarter panels and both doors. Quite an extreme thing to do but the car is such a great example it really was worth spending the money on it. And now, of course, it looks truly superb. I’ve got plenty of photos before the work was done so you can see how minimal the issues were, the untrained eye would have struggled to see them. The Speedline Turini’s have been refurbished at Lepsons of Gillingham and look stunning, with Michelin Pilot Sport 3 fitted that will need replacing next year. The standard Renault steering wheel has been re-trimmed by Royal Steering Wheels in black leather.


The car has performed faultlessly and has not let me down in any way, with no bugs or niggles. It drives superbly, and the engine runs smooth and pulls with a lot of force. The interior is outstanding, non-smoking owners. The MOT runs till August 2017.


I have lots of photos from it’s ownership with me which i will pass on to the new owner, if you’d like to see any in particular just ask.


Feel free to contact me with questions, I am based in Hornchurch, Essex.


£8,000. It’s an excellent car, and I’m in no rush to sell.


Many Thanks.


David.

IMG_2807.jpg IMG_2812.jpg IMG_2817.jpg IMG_2826.jpg IMG_2836.jpg
IMG_2845.jpg IMG_2849.jpg IMG_2850.jpg IMG_2855.jpg IMG_2857.jpg
 
Joined
Nov 20, 2015
Messages
1,170
Reaction score
717
Location
Yorkshire
Interesting on the alarm. I don't think any of them came with a factory fitted alarm, looking at the wiring jobs on the ones I've seen, mine included it's not factory standard.
Someone on here may know what the story was with the alarms on these cars but I don't think they were installed at the factory. Just out of interest where was the trim cut for the sensors as mine hasn't been cut ?
 
Joined
Sep 5, 2010
Messages
1,129
Reaction score
547
Location
Newbury
Looks like a fantastic example!

I think many alarms were fitted dock-side on arrival in the UK.
 
Joined
Dec 1, 2013
Messages
1,145
Reaction score
297
Location
Swindon, Wilts
Looks great and good luck with sale.

My sensors on the a post had two small holes drilled in them. One for the screw to hold it and one for the wire to go.
 
Joined
Mar 31, 2009
Messages
379
Reaction score
4
Looks great and good luck with sale.

My sensors on the a post had two small holes drilled in them. One for the screw to hold it and one for the wire to go.

That's it. About 6 years or so ago I used to be on the forum quite a lot, marrow (not sure if he's still on here) arranged an essex meet and about 8 cars met up. Mine was the only one that had neither alarm nor cut outs on the a pillar, and didn't bleep when the car was locked (i think). People were quite fascinated by it! I posted the question back on the forum after and no one came forward about not having an alarm or cut outs. Maybe there are more out there?

Thanks guys, yesterday was a sad day when i posted this up! Got a guy coming to look on saturday that sounds keen, he's seen quite a few poor examples already so knows what he's looking at, we'll see.
 
Joined
Dec 1, 2013
Messages
1,145
Reaction score
297
Location
Swindon, Wilts
I think the alarms are done my cobra but definitely done at the docks so could be some differences depending who fitted them I guess.

Good luck for Saturday
 
Joined
May 30, 2007
Messages
1,286
Reaction score
156
Location
Cambs
That's it. About 6 years or so ago I used to be on the forum quite a lot, marrow (not sure if he's still on here) arranged an essex meet and about 8 cars met up. Mine was the only one that had neither alarm nor cut outs on the a pillar, and didn't bleep when the car was locked (i think). People were quite fascinated by it! I posted the question back on the forum after and no one came forward about not having an alarm or cut outs. Maybe there are more out there?

Thanks guys, yesterday was a sad day when i posted this up! Got a guy coming to look on saturday that sounds keen, he's seen quite a few poor examples already so knows what he's looking at, we'll see.

Hi - I'm still here! Sorry to see you selling up. If I was looking for one, I'd be heading in your direction quickly. All the best.
 
Joined
Feb 24, 2008
Messages
497
Reaction score
53
I think many alarms were fitted dock-side on arrival in the UK.

I think that was the case. My document pack has a leaflet in it which has alarm fitting instructions. Also a certificate/invoice stating the alarm was fitted and signed by the installer.
 
Joined
Mar 31, 2009
Messages
379
Reaction score
4
Cheers marrow.

Oo, I don't have any alarm related stuff in the Renault wallet.

Just updated the price on piston heads to £7,750
 
Top