BigTont's latest activity

@BigTont I have never touched the rear beam bushes or rear beam on the car. As you are aware it had all the braided break lines and ABS...

Fantastic work. Out of interest, how much did this cost for parts and blasting / costing all in?

The blasting and powder coating was only £80 for everything. High level guess for all bolts, brackets, ball joints, track rod ends, top...

You look like you are doing a Great job 👏👏👏

Anyone replaced the stereo with a decent Android auto stereo. Hundreds of Chinese Android units on eBay and Amazon. No idea where to...

Front all back together - pretty happy with that. Apart from the upper steering rack bolts was very straight fwd. particularly...

As I mentioned in a previous post(?) as a last resort, the Powerflex covers will fit over the original bump stop. Below, the Powerflex...

Bloody Hell @BigTont you are not messing about. Hope you enjoy the car

In process of refreshing front end/underside of car. Was in pretty good nick and didn’t really “need” anything, but decided if dampers...

Just got my dampers back from BG and they actually provided a set of gaiters to suit. Not cheap (~£40 each), but seem to fit well and...

Thanks for your help/contributions over the years, @MarcB - good luck and best wishes with whatever comes next. (y)

Here you go, final post and part details are in the photos-...

I found rubber gaiters to fully go over the shock absorber eliminating the gap for shite to get into the shaft. I'll try and dig back in...