Camber Correcting Bolts.

[BenG]

After a pair of Camber Correcting Bolts...

Thanks.

 

[PPTom]

I got mine from a chap called George, who deals in Whiteline stuff: maryparis@tiscali.co.uk, also got a rear swaybar
I think he only takes cheques but my whiteline bolts were only £30, nice bloke to do business with.

 

[Cue]

correcting bolts? you mean just camber bolts or are these something different?

you can pick up some from larkspeed for around £25 iirc.

 

[BenG]

KTR have them advertised as Camber Correcting bolts ? But ye just camber bolts.

£25 is a reasonable price ill try Larkspeed.

Cheers guys.

Much appreciated.

 

[power ranger]

Atre these needed on a Trophy or are they specfic for track use? :?:

 

[hoolio]

No they are not specific to track use, improves cornering even more if that's possible.

There are two things i'd definitely recommend doing to the T, increase the camber/check alignment and upgrade the brakes.

 

[BenG]

Im ging for Toe out 0.10 and camber -2.00

 

[hoolio]

A fine combination What with the STM you'll be surprised at the difference.

 

[BenG]

Good because the handling has been awful lately.

Im about sick of it, so im just doing every handling mod I intend to do in one go...

 

[hoolio]

Yeah that's what i did and it worked brilliantly for me, the only drawback being that it's difficult to pin down what each mod brings to the party.

 

[BenG]

Ye I know but im past caring tbh.

 

[BenG]

I cant find Camber bolts on Larkspeed. :?

 

[Cue]

strange.... try phoning them.

 

[PPTom]

I think they used to sell the generic Eibach 14mm ones, not Clio specific but I think any 14mm camber bolt will fit.

 

[hoolio]

I'll have to check but i thought a 12mm bolt gives a perfect -2.0.

 

[shiftspark]

Im ging for Toe out 0.10 and camber -2.00

Great setup , makes it even quicker in the wet

 

[BenG]

I'll have to check but i thought a 12mm bolt gives a perfect -2.0.

Ive heard that also.

Great setup , makes it even quicker in the wet

Cool. 8) and the dry I hope :wink:

 

[shiftspark]

I'll have to check but i thought a 12mm bolt gives a perfect -2.0.

Thats what I have used but they need to be high tensile cap heads (12.9 spec iirc) and special nuts made by spiralock which if you ring them up they will give you a couple free of charge if you ask them nicely

Although I have only had the tracking set and used my own camber/caster tool to check the camber.

 

[hoolio]

I'll have to check but i thought a 12mm bolt gives a perfect -2.0.

Thats what I have used but they need to be high tensile cap heads (12.9 spec iirc) and special nuts made by spiralock which if you ring them up they will give you a couple free of charge if you ask them nicely

Although I have only had the tracking set and used my own camber/caster tool to check the camber.

Like these

 

[shiftspark]

I'll have to check but i thought a 12mm bolt gives a perfect -2.0.

Thats what I have used but they need to be high tensile cap heads (12.9 spec iirc) and special nuts made by spiralock which if you ring them up they will give you a couple free of charge if you ask them nicely

Although I have only had the tracking set and used my own camber/caster tool to check the camber.

Like these

Yep their the ones