Project 338

[LiamH]

Been a while since I've last updated, I still haven't got round to fitting the brembos! However I have done a few little interior bit to tidy the car up:

I've fitted the leather pretensioner covers on the seats as I hated the way it looked with them exposed.

Also today I removed the original gear knob and replaced it with a richbrook slant type fitted to some of the Swiss trophies,

I struggled to locate one to start with but contacted richbrook directly and they still have them, just not listed for sale.

Still an absolute pleasure to own this car even 6 months down the line!

 

[LiamH]

Still loving the trophy, I've put another 10k on it or there abouts.

Today's I have changed the Nearside driveshaft for a new unit as it had become notchy on full lock...

I noticed the outer ARB bushed need changing while I was doing this so my question is should I go for powerflex or OE?

 

[Cue]

If you're poly bushing, be aware that it's a rocky road. The bushes that may not requiring change at the moment will suffer increased wear as the poly bushes are alot denser than oem. IF you're doing road miles, don't do the black series - you're fillings and passengers won't be liking it lol

 

[LiamH]

I may just got OE then to be fair as new OE should still be an improvement over 90k old bushes

Also just put a brand new set of PS3 on the front as during the driveshaft work I noticed they needing doing too!

 

[LiamH]

Been a while since I updated 338,

Just been looking after the general maintenance of it, a

Today it's had a full service and while I was in there I investigated a problem of the car not getting up to temperature,

I found this to be a failed Thermostat housing gasket, also the source of a small oil leak... This has now been replaced with a genuine Renault part.

I noticed when changing this that someone had previously had a go at fixing it Due to the amount of instant gasket present.

This was all cleaned away and the new gasket was fitted without any instant gasket as per Renault advice. The trophy is once again in great mechanical condition.

 

[GazTwo]

Just painted mine as part of my brake refurb. I fancied a lairy yellow but ended up doing black to keep a more standard look
View attachment 25084View attachment 25085

@JJ55 ....what did you use for painting the callipers?

 

[martylane]

Glad to see you care for it big time. How is it doing right now?

 

[LiamH]

It's been a good while...

And I'm currently in the progress of putting the trophy back on the road after a 3 year break.

I've stripped all the arch liners out and given everything a clean. Currently fitting new discs and pads and getting my spare set of Sachs dampers ready for fitting so the others can go for refurb.

I also plan to apply Lanogaurd under the car and to the arches as it looks great and the moment and it would be nice to keep things that way!

Really looking forward to having 338 back on the road!

 

[LiamH]

It has also now had a new alternator as the old one was goosed! Done using the jubilee clip method of compressing the tensioner, which I must say made things much easier!

 

[LiamH]

And a little under bonnet cleaning, I know they didn't come with the engine cover I just prefer the looks tbh, fuel rail cover is off as the paint is drying