OSR ABS sensor for #249

Joined
Aug 7, 2017
Messages
29
Reaction score
16
HELP!

Anyone have a working spare one?

My almost complete Project is on hold at present as my trusted mechanic says he hasn't found one of these and Reault UK don't currently have one. I know they are Trophy specific.
 
Joined
Aug 7, 2017
Messages
29
Reaction score
16
The ones euro send are completely wrong not just plugs wrong way.
I am struggling to find one new or used TBH.
 
Joined
Jan 19, 2014
Messages
1,514
Reaction score
460
Location
Warrington...leaving the club
Hope you do get sorted..
a tip for anyone else.

wheel off, caliper off, disc off (new hub nut should be used and dont loose your spacer.)
Now at this point the arse of a job is the 3 large and 1 smaller torx head bolts with totally rottent threads and bolts on the other side. for the on your own DIy'er at home it's a terrible job which left me with a loose bolt i had to hacksaw out..
I then noticed if you just shaved a little off the top edge of the rear beam with an angle grinder you could smash the old abs sensor out and have enough room to get a new one in. Thus saving messing taking the rear stub axle off at all.
 

BenG

ClioTrophy Moderator
Joined
Feb 19, 2008
Messages
2,215
Reaction score
512
Location
Cumbria
Trophy No.
266
PMS sell the Axle Beam to Hub mounting bolts for £10.

68D46C97-1C01-4429-8BCB-EC5A5B44929D.jpeg
 
Joined
Jan 19, 2014
Messages
1,514
Reaction score
460
Location
Warrington...leaving the club
Yep, perfect photo Ben,
As Ben says if you can get them out anyway you can, great.

if not you can shave the very top and giveyourself enough room to slide a new one in with out touching the stub axel. The unseen in bens photo part of the sensor is long. so it needs to slide in straight.
 
Joined
Aug 7, 2017
Messages
29
Reaction score
16
Hunted high and low.
Only one I could find was a used one on ebay from Australia!!!!!!!

Hope it doesn't take a month to arrive!!
 
Top