Need a favour...

dablk · Mar 25, 2017

would anyone be able to remove their drivers scuttle panel. And take some photos of the heater boxes and cables connections underneath.

What I found under my trophy wasn't the same as my old 182.

So trying to work out if what I have is wrong or if Trophies are different to 182.

It must be a trophy.

Many thanks
Chris

Kingpin · Mar 25, 2017

I've two trophies if you want to pop across the water and have a butchers.

dablk · Mar 25, 2017

Cheers mate,
If I can one evening that would be great.

Chris

Kingpin · Mar 25, 2017

Yeah no issue, just drop me a pm.

Kingpin · Mar 25, 2017

This what you needed?

dablk · Mar 25, 2017

Yes cheers mate and too MossyV6.

Confirms the trophy does have a different box to a 182 as it doesn't have the fin resistor pack that goes in the still blanked hole on the far right.

bearne1 · Mar 27, 2017

Has your blower packed up?

Took mine out last summer and sprayed and cleaned all contacts and it has worked daily ever since.

dablk · Mar 27, 2017

Yeah.. that's the next port of call.

The main fault on a 182 is the Fin resistor pack.. which the trophy doesn't have. So I had geared up to try that last weekend. Didn't want to do anything else till I knew what I was looking at.. which turned out to be correct. Thanks to kingpin and Mossyv6

bearne1 · Mar 27, 2017

Mine just stopped working completely and I also remember reading about the resistor pack. The motors are not a great deal from breakers but like you said, its making sure you get the right one.

Hope you get it sorted.