Oracle's latest activity

I do apologise, my memory of the exact appearance of these cushions must have faded. You have fitted the bearing on the correct side of...

I’ve had mine done by a trim shop in Bradford - used them for years - £120 cash They did both bolster’s and re-foamed the front pull...

I agree. I`m not sure how supposedly grown men can make something so simple, so difficult. You pictured the bearing on the wrong side...

https://www.autodoc.co.uk/ridex/13630579 The hole in the centre of doughnut is of sufficient diameter that there is nothing to prevent...

Totally. Just consider it in terms that the doughnut is part of the bodyshell, and that bodyshell just rests on the bearing. Once the...

That is the modified kit 543A09780R, for some reason it does not include the replacement 1 piece spacer/nut 8200867250 that is required...

These are the correct original parts.

As far as I can remember, as per the first picture. Old style

NEITHER. The doughnut is NOT part of the assembled strut, and frequently remains in the underside of the turret when removing said...

£23250. I`ll be interested to see where it pops up next...

Very good. "Daily driver dust" I`m afraid.

If the nut pictured is a separate item from the top cap, it is from the updated modification kit 543A09780R. It should not make contact...

Affirmative. I would guess the garage has a vice and a drill bit though,

You will have to use the original top covers with nuts to fit over the 17mm half nut. The new ones are flat bottomed. If you have a...

The new 27mm nut replaces the original spacer and 17mm half nut ( spanner sizes ). Put the original spacer and nut to one side as they...